loading
reading
writing
saving
searching
Hitachi NV65AH MADE IN JAPAN Wire & Plastic 2-1/2" Coil Siding Nailer - $300 (SW Houston/ Sugar Land / Richmond)
QR Code Link to This Post
Hitachi NV65AH OEM MADE IN JAPAN Wire & Plastic 2-1/2" Coil Siding Nailer HardiePlank, also be used for decking and sheathing, as well as fencing. X0714_ $300.00 - Text only: 832-774- 3 9 Five Six
If the Ad is still on Craigslist means this item is still available for sale.
Text only: Eight Three Two - Seven Seven Four- Three Nine Five Six
or 832-774- 3 9 Five Six
For sale is a Pre-Owe, in Very Good Condition. This is a "Made in Japan" NV65Ah nailer. These is the real Hitachi's that are very highly sought-after. Not the cheaper made Taiwan copy. The pictures shown are the actual tool that you will receive. The tool has been tested and works as intended. Toll has scratches. Powerful pneumatic Siding Coil Nailer recommended for use in HardiePlank Lap Siding and hardboard siding. A versatile siding tool, the NV65AH may also be used for decking and sheathing, as well as fencing.
Specifications:
Fastener Type: Coil, Wire/Plastic Sheet Collation
Magazine Angle: 16-Degrees
Fastener Length Capacity: 1-1/2" - 2-1/2"
Fastener Diameter Range: .090 - .099
Magazine Capacity: 200-300
Magazine Loading: Side
Air Inlet: 3/8"
Operating Pressure: 70-120psi
Actuation: Contact Optional Sequence
Air Consumption: .049(FT3/Cycle@100psi)
L x W x H: 10-1/2" x 5-1/6" x 11-13/16"
Lightweight, only 4.6 lbs
Model: NV65AH
Country/Region of Manufacture: Japan
Type: Coil Nailer
MPN: NV65AH Japan
Brand: Hitachi
UPC: 717709004689